Fireball Tool 44pc Magnetic Shim Kit
€229.00 Excl. VAT
Description
These shims have countless uses around the shop and also in combination with our squares.
Each shim is ground on 6 sides with two magnets on the bottom face, there are 7 different heights and 4 pieces of each height in a set.
The magnet sizes are carefully chosen so that the taller shims have enough magnetic force to hold them up sideways on a project while carrying some of the smaller shims. The thinner shims have smaller magnets which reduce the amount of force required to remove them.
The shims are ground on all 6 sides to an accuracy of +/-0.0009 which is less than 1/1024 of an inch! Think of a 1/32” reading on a machinist rule, now divide it by 32 again to get 1/1024 of an inch.
Shims are hardened to HRC 50. Just remember, to properly measure these you need to use a micrometer mounted on a stand and with the shim wiped clean. A pair of calipers in the hand with a dirty shim will not get an accurate measurement.
Whats included
| Height (mm) | Length (mm) | Width (mm) | Pieces in Kit | Magnetic |
|
5 |
50 |
25 |
4 |
YES |
|
7.5 |
50 |
25 |
4 |
YES |
|
10 |
50 |
25 |
4 |
YES |
|
15 |
50 |
25 |
4 |
YES |
|
20 |
50 |
25 |
4 |
YES |
|
25 |
50 |
25 |
4 |
YES |
|
50 |
50 |
25 |
4 |
YES |
|
1 |
50 |
25 |
4 |
NO |
|
1.5 |
50 |
25 |
4 |
NO |
|
2 |
50 |
25 |
4 |
NO |
|
2.5 |
50 |
25 |
4 |
NO |
| Material | Aluminium, Dragon Scale |
|---|
