ESAB Rogue EM 180 is an inverter-based MIG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.
With a weight of only 16.2 kg, 230V single-phase input and compatibility with 10 kVA generators, this system provides maximum flexibility and portability, both in the shop and in the field.

-Large 14 Segment Display –instantaneous feedback for both voltage and wire feed speed for clear viewing
-Synergic Weld Programs –full range of welding parameters, 0.5 –8.0 mm with single knob control
-Power Factor Correction (PFC) –ensures a stable arc, resistant to power fluctuations even while working on long extension cables up to 100 m
-Unique rugged industrial design –supporting multiple lift points and cable management
-Arc Dynamics –fine tune arc characteristics for a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel
-Spool Gun Ready –Rogue automatically configures set up when spool gun is connected.

-IP23S rated for indoor/outdoor use

 

Esab Rogue EM 180 is supplied with:

– 180A welding machine with 3 m power cable

– MXL 201 Euro 3 m mig torch

– ground cable kit 16 mmq, 3 m

– gas hose with quick connection 4.5 m

– mild steel/iron welding rod ESAB OK AristoRod 12.50 0.8 mm 1 kg

– MMA electrodes ESAB GoldRox, 2.5 x 350 mm, 1 kg

– drive rollers 0.6/0.8 mm V (mounted), 0.8/0.9 mm V and 0.8/0.9 mm VK x flux-cored wire,

– safety instructions.

Specifications
Voltage	230 VAC 1, 50/60 Hz
GMAW Welding Output	180 A / 23 V @ 25 % Duty Cycle 116 A / 19.8 V @ 60 % Duty Cycle 90 A / 18.5 V @ 100 % Duty Cycle
SMAW Welding Output	150 A / 26.0 V @ 25 % Duty Cycle 97 A / 23.9 V @ 60 % Duty Cycle 75 A / 23.0 V @ 100 % Duty Cycle
Current Range	30-190 A
Voltage Range	12-26 V
Wire Feeder Specifications	2.0-16.5 m/min
Open Circuit Voltage	78 VDC
Metal Stainless Steel Cored Wire Aluminium Mild Steel	0.6-1.0 mm 0.8-1.0 mm 0.8-1.0 mm 0.6-1.0 mm
Max Spool Diameter	100 & 200 mm
Power Factor at Maximum Current	0.8
Efficiency at Maximum Current	82.7 %
Energy Save Mode	20 W
Operating Temp	-10 – +40 °C
Enclosure Class	IP23S
Certification	CE
Dimensions, L x W x H	590 x 220 x 385 mm
Weight	16.2 kg